HPE Community
Disk Enclosures
1753259 Members
5417 Online
108792 Solutions
New Discussion юеВ

Re: Secure Manager question

 
Richard Murden
Regular Advisor

тАО05-15-2006 06:32 AM

тАО05-15-2006 06:32 AM

Secure Manager question

On the host where i am going to administer the VA, i do the following command:
[rpn0:/]#armdsp -i

Product ID: HP-A6218A
Device Type: Virtual Disk Array
Alias: va7410-2
World Wide Name: 50060b000014e9df
Unique ID: HPA6218A00SG230J0239
Serial Number: 00SG230J0239
Management Path: sdc9026.com:/dev/rscsi/c12t0d0


Why does the management path reflect the old hostname of sdc9026 when it should be rpn0? How do i correct this? I am running HPUX 11.11
Thanks,
Richard
0 Kudos
Reply
3 REPLIES 3
Prashant Zanwar_4
Respected Contributor

тАО05-15-2006 07:40 AM

тАО05-15-2006 07:40 AM

Re: Secure Manager question

Could be that, the array was used with other host & this particular LUN was actively used there.. Some config still reflects that..
It has to be changed..

Prashant
"Intellect distinguishes between the possible and the impossible; reason distinguishes between the sensible and the senseless. Even the possible can be senseless."
0 Kudos
Reply
Richard Murden
Regular Advisor

тАО05-15-2006 08:14 AM

тАО05-15-2006 08:14 AM

Re: Secure Manager question

how do i change the information?
Thanks,
Richard
0 Kudos
Reply
Prashant Zanwar_4
Respected Contributor

тАО05-16-2006 06:11 AM

тАО05-16-2006 06:11 AM

Re: Secure Manager question

I am not much in array side config, might be you need to get in array manual and try some tricks..
Prashant
"Intellect distinguishes between the possible and the impossible; reason distinguishes between the sensible and the senseless. Even the possible can be senseless."
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.