Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Secure Manager question

Richard Murden
Regular Advisor

Secure Manager question

On the host where i am going to administer the VA, i do the following command:
[rpn0:/]#armdsp -i

Product ID: HP-A6218A
Device Type: Virtual Disk Array
Alias: va7410-2
World Wide Name: 50060b000014e9df
Unique ID: HPA6218A00SG230J0239
Serial Number: 00SG230J0239
Management Path: sdc9026.com:/dev/rscsi/c12t0d0


Why does the management path reflect the old hostname of sdc9026 when it should be rpn0? How do i correct this? I am running HPUX 11.11
Thanks,
Richard
3 REPLIES
Prashant Zanwar_4
Respected Contributor

Re: Secure Manager question

Could be that, the array was used with other host & this particular LUN was actively used there.. Some config still reflects that..
It has to be changed..

Prashant
"Intellect distinguishes between the possible and the impossible; reason distinguishes between the sensible and the senseless. Even the possible can be senseless."
Richard Murden
Regular Advisor

Re: Secure Manager question

how do i change the information?
Thanks,
Richard
Prashant Zanwar_4
Respected Contributor

Re: Secure Manager question

I am not much in array side config, might be you need to get in array manual and try some tricks..
Prashant
"Intellect distinguishes between the possible and the impossible; reason distinguishes between the sensible and the senseless. Even the possible can be senseless."