Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Show WWN on 11iv3 for EVA-5000 Active / Active

SOLVED
Go to solution
Ian Dennison_1
Honored Contributor

Show WWN on 11iv3 for EVA-5000 Active / Active

I know I can get this using Autopath but how can I get the WWN from the EVA LUN using native commands only? The command "ioscan -m lun" shows EVA Info but not the WWN.

Any takers? Share and Enjoy! Ian
Building a dumber user
5 REPLIES
AnthonySN
Respected Contributor

Re: Show WWN on 11iv3 for EVA-5000 Active / Active

did you try fcmsutil
Uwe Zessin
Honored Contributor

Re: Show WWN on 11iv3 for EVA-5000 Active / Active

# fcmsutil /dev/ get remote all
.
susanta_dutta
Trusted Contributor

Re: Show WWN on 11iv3 for EVA-5000 Active / Active

Hi Ian,
I guess, you are looking for WWN of EVA LUNs which are presented to HP-UX host. In that case use "EVAInfo"

EVAInfo is part of the sssu download. Here is the link for 9.1:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=CommandViewEVA9.1

Attached is an output of evainfo -a

Regards
Susanta
susanta_dutta
Trusted Contributor
Solution

Re: Show WWN on 11iv3 for EVA-5000 Active / Active

Sorry, did not notice your HP-UX version. In HP-UX 11iv3(11.31), "scsimgr get_info all_lun" provides information including WWID on all attached logical units.

Regards
Susanta
Ian Dennison_1
Honored Contributor

Re: Show WWN on 11iv3 for EVA-5000 Active / Active

Uwe

Tried the "fcmsutil" but only got the WWN of the controller, not the disk WWNs.

Susanta

That was exactly the result I was after.

Thanks all. Share and Enjoy! Ian
Building a dumber user