Smart Array 5i/532 error

[Dawid Chrzan]

Hello,
hpaducli reports some errors ( see attachment )

SCSI Port 2, Drive ID 0
Total Errors Logged = 0x00000001
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
00 0e 00 00 00 01369040(0) 0000082a 28 0000

SCSI Port 2, Drive ID 1
Total Errors Logged = 0x00000003
Error Log Data:

SCSI CAM Sense Sense
Stat Stat Key Code Qual Block(Vl) Time Op Info
---- ---- ----- ----- ---- --------- ---- -- ----
00 0a 00 00 00 01369040(0) 0000082a 28 0000
00 0a 00 00 00 00000000(0) 0000082a 00 0000
00 0a 00 00 00 01369040(0) 0000082a 28 0000

and

Physical Drive State: (00=OK, 01=bad or not present, 02=replacement)
01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
Signature: 0xa00a43a3
RIS version: 1010
Logical Drive State: (00=OK, 01=failed, 02=unused)
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


should i worry or not ? :)
Except these errors i find there nothing worrying.

Google didnt tell a lot about hpaducli reports.
Please help.

Best Regards
Dawid Chrzan

[Roy Main]

You should be fine. It was a scsi bus reset and a target selection error a long time ago. If you are not having any current problems there is nothing to worry about.