Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Array 6400 and Winnt4.0 Boot.ini

Kari Porvari
Occasional Contributor

Smart Array 6400 and Winnt4.0 Boot.ini

I have installed Windows NT4.0 on C-drive on a Proliant 380G3 with SA6400 Raid controller.
But I have to install Windows NT4.0 on the same server but this time on D-drive. The problem is that Windows NT setup changes Boot.ini. Following is how it looks like.
[operating systems]
scsi(0)disk(4)rdisk(0)partition(2)
multi(0)disk(0)rdisk(0)partition(1)
Line nr 2 with "multidisk" is the right one.

Anybody seen this earlier ?
I installed the right WinNT 40 driver for the SA6400 during setup for D-partition..