Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Smartstart don't start ACU

Ayman Altounji
Valued Contributor

Smartstart don't start ACU

Hi,
I have a new PL ML350 with smartstart 4.90 and a LC 2.
The Array Configuration Utility is not starting during the smartstart process. I have the error that no phisical or logical drives are detected.
Instead I have to use the hardware-config (F8) and create a logical drive (max capacity) and then the smartstart procedure goes on.
Is there something I can do about this?

Thanks,
Hugo