Disk Enclosures
1752396 Members
7394 Online
108788 Solutions
New Discussion юеВ

Steps to installing a Command View EVA server

 
SOLVED
Go to solution
Berd
Trusted Contributor

Steps to installing a Command View EVA server

Is installing a CommandView EVA server the same as CommandView for a XP ?

I seem to recall that the XP CommandView server sat on it's own private network ?

From high level would I be right in saying the steps are:-
Install CommandView software onto server
Ensure Server is fibre cabled and zoned in with EVA channel paths
Discover EVA


Berd
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: Steps to installing a Command View EVA server

Your steps are right. I know CV EVA can exists next to CV TL, but I don't know about CV XP.

Why try it?

(I would preserve a backup of the server (a disk from RAID 1) before changing anything.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Berd
Trusted Contributor

Re: Steps to installing a Command View EVA server

Hi Torsten,

The server will be newly isntalled primarily to provide access to a new EVA so it would not be necessary to backup initially.

What did you mean by TL ?

Berd
Torsten.
Acclaimed Contributor

Re: Steps to installing a Command View EVA server

Command view tape libraries - another command view.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!