Support for CommandView 2.0

[Chuck Ciesinski]

To all,

Is HP still supporting CV-2.0 with 4.0 having been released? Is there a link on the HP ARRAY page with this info?

Really having a Monday...

Chuck

[Steven Clementi]

Where/how are you using CV2.0? older CV's won't work with newer firmware, at least not properly. (assuming your talking about CV-EVA).

As for support, I doubt they even acknowledge it, but can't say for sure.


Steven

[Uwe Zessin]

Highly unlikely. CV-EVA V2.1, for example, did come with SMA V2.0 Service Pack 2 and did support HSV100 - VCS2.003 and HSV110 - VCS2.002.

[florence mathon lermusi · Accepted solution]

Hi Chuck,

try : ftp://ftp.compaq.com/pub/products/sanworks/techdoc/managementappliance/SMASupportMatrixv1-3.pdf

Fl

[Devender Khatana]

Hi,

For XP I think the latest version of command view in 2.1 only. Is not it ?

-Devender

[Chuck Ciesinski]

To All,

Subsequent to the post, my datacenter team has advised me that both arrays are on 3.0. The link to the support page was VERY helpful. Thanks to all who replied.

Chuck

[Chuck Ciesinski]

See my message about information from datacenter. We are 3.0 on both arrays.