Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

System board replaces and RAID position

Mahbubul Hasan
Occasional Contributor

System board replaces and RAID position

One of our Server which built-in RAID controller and RAID configuration is
RAID 1 for OS and RAID 5 for Data.
Unfortunately system board become faulty, that’s why we need to replace
the system board.
I need to know after replacing the system board, RAID configuration is working as before?

--
Md.Mahbubur Rahman
1 REPLY
Víctor Cespón
Honored Contributor

Re: System board replaces and RAID position

The RAID configuration is stored on the first sector of each disk (RIS). You can replace the SmartArray controller o move the disks to another server and the controller will load the configuration from the disks.