Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Trying to find boot log on messages

Ayman Altounji
Valued Contributor

Trying to find boot log on messages

During a boot of the server a message from the array controller flashed on the screen. System not complete enough to log in the console log. Where are these messages logged?
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Trying to find boot log on messages

Run diags and check the critical error log for message ......
Ayman Altounji
Valued Contributor

Re: Trying to find boot log on messages

Thank you for your reply. I am stronger in the software side on Network support. The hardware side I have to address for a short period of time. This server that I would like to find the message on is RAID5 and I am told the only way to run digs is to bring the server completely down. Running digs was my first thought. Through discussion I was told I can not just dig the one drive in the array.

Thank you...mg