Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to upgrdae firmware of HP Smart Raid Controller

macii
Occasional Visitor

Unable to upgrdae firmware of HP Smart Raid Controller

Hi,

 

I am upgrading HP smart Array controller firmware from 2.08 & upgraded with Firmware (Patch 10064-02) iso file & 9.3 from HP site but didn't work out. __________________

 

Also I am using Redhat 5.7 server. I tried with the above two & after loading from iso image, still the same firmware version as 2.08

 

Please assist


Thanks

4 REPLIES
Johan Guldmyr
Honored Contributor

Re: Unable to upgrdae firmware of HP Smart Raid Controller

Hi, use SPP - http://hp.com/go/spp

macii
Occasional Visitor

Re: Unable to upgrdae firmware of HP Smart Raid Controller

Johan Guldmyr
Honored Contributor

Re: Unable to upgrdae firmware of HP Smart Raid Controller

Well, do you have a Lefthand P4000?
Torsten.
Acclaimed Contributor

Re: Unable to upgrdae firmware of HP Smart Raid Controller

This patch upgrades the P400 RAID Controller firmware to version 7.08 from any firmware version less than 7.08. It does not update firmware if it is already at version 7.08. Applies to SAN/iQ 8.0 and 8.1

 

 

Do you run these versions?

 

Otherwise consider to boot SPP in order to upgrade offline.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!