1748104 Members
4706 Online
108758 Solutions
New Discussion юеВ

Unbind LUN

 
SOLVED
Go to solution
james gould
Frequent Advisor

Unbind LUN

Trying to unbind a LUN through SAM but am
unable to find the option. Can find the bind
option but no unbind.

Running on 11.0 hpux
4 REPLIES 4
Bill McNAMARA_1
Honored Contributor

Re: Unbind LUN

what is the disk array.
AutoRaid should be in the actions field as with fc60..
But use command line..
amcfg -l (lunnumber) -d (serial number)
arraycfg -l (lunnumber -d (serial number)

Later,
Bill
It works for me (tm)
linuxfan
Honored Contributor

Re: Unbind LUN

Hi James,

what kind of array are you using?
For autoraids(12H arrays), you can find the serial number of the array by issueing
arraydsp -i

arraydsp -i
(gives the configuration of the autoraid)

arraycfg -d -l
where is the lun you want to delete and is the serial num of the array

-HTH
Ramesh
They think they know but don't. At least I know I don't know - Socrates
Andreas Voss
Honored Contributor
Solution

Re: Unbind LUN

Hi,

is your LUN displayed als unused in SAM ?
Before unbinding a LUN you have to vgreduce the LUN from a volume group.

Regards
james gould
Frequent Advisor

Re: Unbind LUN

Andreas was correct. The unbind will appear
once logical volume and volume group are
removed. Was able to highlight the LUN and
the unbind message appeared when in SAM.

Thanks