Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Unpopulated Disk drive

sachin_holikar
Occasional Visitor

Unpopulated Disk drive

Hi,

 

I have replaced the faulty disk with the new one in HP P6000 EVA.

Post replacement the disk is showing as  "Operational State : Unpopulated"

The Disk LEDs are as normally Green.

 

Please suggest.

 

Thanks,

Sachin

1 REPLY
Torsten.
Acclaimed Contributor

Re: Unpopulated Disk drive

It takes sometimes a while before the status change ... consider to do a refresh for the EVA or restart P6000 CV service.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!