Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Unusual Drive Status in CIM

ashfaq hussain
Occasional Visitor

Unusual Drive Status in CIM

We have an external array running 6 x 18 Gb ULTRA 2's. When a degraded drive was replaced with a new one, the status in CIM went from Status: OK, Action: Replace Drive to, Status: Failed, Action: Replace drive, TO Staus: OK, Action: No action required. It had changed to failed 20 mins into the rebuild cycle of the drive. Then changed back to OK. This server is on completely new hardware, is it possible that the CIM agents are corrupt?