Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade from 3200 to 5302 Problems??

Patrick_57
Occasional Contributor

Upgrade from 3200 to 5302 Problems??

Hello

I have a 6400r with 2 36G disks Raid 1. I was trying to upgrade from a 3200 Smart Array to a 5302 SA. When I do I get the BSOD (inaccesable boot volume) I went back to the 3200 and all is well. Any sugestions??

Thanks
1 REPLY
Janine Bertolo
Honored Contributor

Re: Upgrade from 3200 to 5302 Problems??

Hi Patrick;

The 3200 and 5300 controllers use different drivers.

Try putting the 5300 controller into the system along with the 3200, running the CSP to install the driver for the 5300, then remove the 3200 controller and run the SCU at F10 to set the 5300 controller as the boot controller.

To get results you've never had before, try something you've never tried before.