Upgrading from SCSI to 431

[Ayman Altounji]

Hi.
I have a Proliant 370, with one disk on SCSI, I wan't to install 431 Raid Ctrl and move the disk to this, then install next disk and make a mirror.

My problem is:
Whin installing 431 and moving the disk, the ctrl says "No logical drives", I then run ACU and set up a logical drive with the one disk (RAID 0), then I get no operating system, and if I boot on floppy, FDISK claims no partitions, I then move the disk back and server boots OK.

Any ideas of wha to do, and can it be done ?????

Flemming Veggerby

[Ayman Altounji]

Flemming,

There is no way to migrate from plain SCSI to array without loosing data. In order to do what you want done, you'll need to install the 2 hard drives on the SA431 controller. Setup a logical drive as a mirror, then install the Operating System on it.

Have a nice day,

Mike