Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Use RAID on HP ProLiant ML150

Igor1985
Occasional Visitor

Use RAID on HP ProLiant ML150

Good day!
I have problem with create RAID 10 on HP ProLiant ML150 Generation 5 Server, and RAID card LSI-3042. I entered in BIOS and set in HDD Configuration Configuration Controller 1 on field to RAID. After reboot server I tried create RAID but before I entered F8 . Server wrote “ No Logical Drivers Found “. What I must doing ?
2 REPLIES
TTr
Honored Contributor

Re: Use RAID on HP ProLiant ML150

After you see the above message, and you press F8, does it go in the configuration menu? If yes, check if the two physical drives are visible and continue to configure a RAID10 logical device. If it does not go into the configuration menu, search in these forums with "No Logical Drives Found" (note: drives, not drivers). There are many different things to try.
Proliantstud
Frequent Advisor

Re: Use RAID on HP ProLiant ML150

Hi,

Try using the CTRL + A key combination instead of the F8 and launch the ACU utlity. You can configure the RAID from ACU.


Cheers,
Anand