Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Using an MSA30 SB (302969-B21) with an IBM x345

Andrew Sinclair
Contributor

Using an MSA30 SB (302969-B21) with an IBM x345

I have an MSA30 SB (302969-B21) and would like to connect it to the ServeRAID-6i+ Controller (13N2190) of an IBM x345 server.
Both the MSA30 and the ServeRAID-6i+ are Ultra320 SCSI.

Are there any issues with this configuration I should be concerned about?

5 REPLIES
Greg Carlson
Honored Contributor

Re: Using an MSA30 SB (302969-B21) with an IBM x345

Definately is untested so the results will be unknown. I would be more concerned about trying to hook up the MSA20 with SATA drives and SCSI interface with your config. Should work, but will be unsupported.
Lets Roll!
Andrew Sinclair
Contributor

Re: Using an MSA30 SB (302969-B21) with an IBM x345

The enclosure is an MSA30 SB (single bus). The drives are 146 GB U320 drives (not SATA).
John Kufrovich
Honored Contributor

Re: Using an MSA30 SB (302969-B21) with an IBM x345

It may work. My only concern is the event handling.
Andrew Sinclair
Contributor

Re: Using an MSA30 SB (302969-B21) with an IBM x345

Would we need to load the HP MIBs into IBM Director (the IBM SNMP trap destination)?
msa20
Occasional Visitor

Re: Using an MSA30 SB (302969-B21) with an IBM x345

i am using msa20 and ibm x345...
how can i do that?