Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

VA Command View SDM only with read access possibe?

Hoffmann Marc
Occasional Visitor

VA Command View SDM only with read access possibe?

For a demo I need the VA command view SDM only with read access to show the VA7100 config. Is it possible to configure this only with read access and if it's possible how can I do this?

Thank you for your help!

Regards,
Marc
2 REPLIES
Vincent Fleming
Honored Contributor

Re: VA Command View SDM only with read access possibe?

Gruezi!

The current version of Command View SDM does not have multiple levels of security, so no, you can't do it in read-only mode.

If I recall, there is a demo mode (or used to be), but that would not show your configuration... just a sample one.

Tschau!

No matter where you go, there you are.
Roger_22
Trusted Contributor

Re: VA Command View SDM only with read access possibe?

Until a few days ago, you could download a working version of Command View sdm from hp.com. Contact your hp support team, they should be able to get you a copy.

Command View security is set by IP address. If your IP address is granted access then you have read/write permission.