Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

VA7100 on warning State

Toni_4
Occasional Advisor

VA7100 on warning State

Host can´t see VA using ARM commands and SDM.I can configure a new LU accessing to the VA through the rs232 port, but the prompt that it showing all the time is " Warning State> ", using the command dsp -f i saw the warning in main enclosure, dsp -e show me the enclosure type set to main. what it happened
4 REPLIES

Re: VA7100 on warning State

can you show what the output is from dsp -s form the rs232 port, also from armdsp -i from the hpux prompt.

also the colour of the disk fc and host fc lights on the rear of the enclosure

Customer Engineer
Patrick Wallek
Honored Contributor

Re: VA7100 on warning State

What happens if you do an 'armdiscover' from the host? See if it will rediscover the array.
Toni_4
Occasional Advisor

Re: VA7100 on warning State

Finally i found a solution myself, catching ideas from other threads and finding some information in internet.Solution: armdiscover couldn´t create DBfile for a bad runing of the Hostagent´s daemons, so any arm command and SDM couldn´t access to VA. And the warning was another problem was causing for bad working of one power supp
Toni_4
Occasional Advisor

Re: VA7100 on warning State

Thanks to forum.