Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

VA7110 controller fw A140 upgrade failed

Hui Liu
Occasional Contributor

VA7110 controller fw A140 upgrade failed

When upgrade VA7110 controller fw from A120 to A140, an error occured "Failed the Write Buffer command.", I download the fw file from the link showed in SAW, and then I download the version A130 from the same FTP site.I still failed. Anyone can help me with this case?

Storage:VA7110 A140 1GBcache
Hosts: Redhat linux
Action already done: OS reboot, VA rebootï¼ -R fullï¼ ,command view restart
3 REPLIES
TTr
Honored Contributor

Re: VA7110 controller fw A140 upgrade failed

You need to connect a console to the VA7110 and check what state it is in. In the worst case scenario, your FW upgrade did not complete and your controller can not boot up. You would need HP to flash a new fw in it.
Hui Liu
Occasional Contributor

Re: VA7110 controller fw A140 upgrade failed

Thanks for your reply.
But after my 2nd time failure, I reboot the VA7110, then tried the A130 fw, but still failed, and now it works normally with version A120.
Torsten.
Acclaimed Contributor

Re: VA7110 controller fw A140 upgrade failed

Did you follow the instructions to break all the locks?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!