Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

VA7110 does not start

cbs400
Occasional Contributor

VA7110 does not start

Testing internal SRAM: Passed
Activating DDR DRAM: Success
Testing L1 cache: Passed
Testing NVSRAM: Passed
DDR DRAM decode test: Passed
DDR DRAM pattern test: Passed
DDR DRAM ECC test: Passed

Copying firmware image to DRAM 38370A100P0109031436: Initializing:
02 04 06 08 0A 02 04 06 08 0A 0C 18 1A 1C 1D 1E 20 22

HP Virtual Array 7110
Firmware Image 2 selected
Activating DDR DRAM: Success
Copying firmware image to DRAM 38370A100P0109031436: Initializing:
02 04 06 08 0A 0C 18 1A 1C 1D 1E 20 22

HP Virtual Array 7110
Firmware Image 2 selected
Activating DDR DRAM: Success
Copying firmware image to DRAM 38370A100P0109031436: Initializing:
02 04 06 08 0A 0C 18 1A 1C 1D 1E 20 22

HP Virtual Array 7110
Firmware Image 2 selected
Activating DDR DRAM: Success
Copying firmware image to DRAM 38370A100P0109031436: Initializing:

and so on. The last block is repeating all the time. It is not possible to access the array from the management server.

# armdsp va7110
Array State : Pending - Starting Up
The current state of the array will not allow this command to be executed.
1 REPLY
Robert_Jewell
Honored Contributor

Re: VA7110 does not start

The POST sequence seems to aborting after the "22" each time. This refers to the synchronizing both controller clocks.

I would recommend removing a controller to see if that helps. If not, install it back and remove the other one.

-Bob
----------------
Was this helpful? Like this post by giving me a thumbs up below!