VA7110...some doubts

[Naveej.K.A]

Hi,

Need some clarifications and sugestions!!

1. Got a Tachylon FC card...ioscan -fnC fc shows:
Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/1/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channe
l Mass Storage Adapter
fc 1 0/2/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channe
l Mass Storage Adapter

Want to know whether i can configure the VA to communicate at 2GB/sec.

2. After i format the array using vfpfmt and connect the VA box to the host, should i need to restart the host for it to identify the lun0?

3. Which command will invoke the GUI based config utility for creating the LUNs??

wbr
naveej

[Naveej.K.A]

Hi,

I got it...the launcher utility is used to start the GUI based configuration.
But its asking for password..

What is the default password??

with best wishes
naveej

[Naveej.K.A]

Got the password too.

username is Administrator
and password is administrator
note the case sensitiviness...

Will pop back in case of more queries

With best wishes
Naveej

[Naveej.K.A]

Got it...Closing the thread