Disk Enclosures
1748136 Members
3730 Online
108758 Solutions
New Discussion юеВ

Re: VA7410 RG Problem

 
SOLVED
Go to solution
Daniel Galante
Occasional Advisor

VA7410 RG Problem

Dear all,

I have a VA7410 with 10 disks and i have a question:
All the 10 disks is in the RG1 and i don't know how to change it. I need 5 disks in RG1 and 5 disks in RG2...
What do i need to do?
3 REPLIES 3
Eugeny Brychkov
Honored Contributor
Solution

Re: VA7410 RG Problem

Daniel,
odd disk slots - RG1, even - RG2. Balance disks between odd and even slots. If you'll do it without VA reformat then VA will warn you 'some disks are not in RG they were assigned to'. I do not know if there will be any other consequences, but would recommend to
1. backup data
2. rearrange disks
3. reformat array
4. restore LUN configuration and data
Post 'armdsp -a' here and I will tell you more
Eugeny
Vladimir Vybiral
Valued Contributor

Re: VA7410 RG Problem

Hello,
(maybe) depending on Your firmware, but for sure with the latest 2 fw releases VA will not change the RG of the disk when You move to different slots. Dsik wil stay initialized in the RG it has been put into when it has been new. You have to backup everything, format the array, recreate LUNs and put everything back if You want to balance disks across RGs.
How did happen that all Your drives are in one RG only? You had to put them into odd or even slots initially??? Strange... BR, Vladimir
When speaking, Your words should sound better than Your silence - Arabic proverb
Daniel Galante
Occasional Advisor

Re: VA7410 RG Problem

Srs...

This is a mistake...
The VA model is 7100. This model really have just one RG.

I'm sorry.

Thanks!