VA7410: Redundancy loss-rebuild failed-missing drive

[C.I.S]

I got these messages in the Array status. Checking in command view the components status: every thing is green (only the warning led is lit on the VA). It is connected to SAN with redundant controllers.

[Owen_15]

Hi CIS,

It sounds like a disk has failed in the array and there is insufficient space to perform a rebuild.

If you attach the output of
#armdsp -a
we should be able to see what the current state of the array is and what needs to be fixed.

Regards
Owen

[tkc]

Run the 'armdsp -i' command to get the array-id. Then the 'armdsp -a ' to view the status of the VA7410 array.

[Rödel]

Hi,do you add some new disk into the array or change some disks ?
and are the new disk added to the group ?

Check if Autoinclude =on
Perhaps that helps.