Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

VA7410 under Windows

SOLVED
Go to solution
Mikschik
Occasional Visitor

VA7410 under Windows

Hello,

i want to use a va7410 disk array under windows. With a Q-Logic FibreChannel Card i got a connection an windows is asking for a Device Driver for the Disk Controller (A6218A). Now i searched for any Driver but only found the Software Command View SDM. I would be grateful if anyone here could help me.

Thank you and best regards
4 REPLIES
goldboy
Trusted Contributor

Re: VA7410 under Windows

Mikschik,
try out the following link:

http://support.qlogic.com/support/oem_detail_all.asp?oemid=21

pick your OS and Qlogic interface.

hope that help

Tal
"Life is what you make out of them!"
Mikschik
Occasional Visitor

Re: VA7410 under Windows

Hello and thank you Tal,

unfortunately the link that you had written is only for the Q-Logic HBA's not for the "A6218A SCSI Array Device" i was searching. Hope there is somewhere a driver that fits.

Thank you

Mikschik
Marco Hogeveen_1
Trusted Contributor
Solution

Re: VA7410 under Windows

Hi,

Your hostmode is probably not Windows but Hp-UX?
Changing it to win2000 should solve this.
But beware if you have hp-ux servers connected to this VA, then you should create a host-table first before changing hostmode.

Good luck,

Marco
Mikschik
Occasional Visitor

Re: VA7410 under Windows

Hello thank you for your help. After assigning it to Windows and format the hole device i was able to connect over sdm create luns and use it under Windows.

Thank you

Mikschik