Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

WWIDMGR, adding new system disk to ES80

WWIDMGR, adding new system disk to ES80

Hello, we are creating a new system disk to an ALPHASERVER ES80 which is part of a 6 node cluster, there are several LUNS which are already used within this environment. When adding the new system disk we had it mounted and did the configuration changes and dismounted th disk and shut down the server.
When I had done the -quickset -udid on the device lun, due to so many luns attached to this server it could not find it, is there a way to maybe 1 - reorder the wwid's so I can see the disk, or 2 - bring this device in manually, or ???
Any assistance or suggestions would be appreciated.
HP STorage support has not been helpful to say the least...getting run-a-round and unable to get a 2nd level tech to assist in this issue.
1 REPLY
Rob Leadbeater
Honored Contributor

Re: WWIDMGR, adding new system disk to ES80

Hi Anthony,

I take it that you've read the manual for WWIDMGR.

ftp://ftp.hp.com/pub/alphaserver/firmware/other/wwidmgr_v13.pdf

It sounds like the filter option would be useful for you.

wwidmgr -show wwid -filter [-full]

Hope this helps,

Regards,

Rob