Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Where can I get the driver for smart-2/p

Ayman Altounji
Valued Contributor

Where can I get the driver for smart-2/p

I have tried unsuccessfully to find the win nt 4.0 driver for smart-2/p array controller. Where can I get it??

I am trying to install win nt 4.0 but when it does not recognize the hard disk. I can access the raid drive (raid 1) upon dos bootup but win nt reports that it cannot find a HD.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Where can I get the driver for smart-2/p

The driver to support the smart-2/p array controller is located on the SS 4.90 path cpqsupsw/ntssd and Compaq website www.compaq.com/support/files/all.sp. Softpaq located in number range on webpage. Softpaq 14437.exe should be downloaded on desktop or harddrive. 14437.exe will have to be extracted by clicking on the sp14437.exe and then will require blank diskettes to create and copy drivers to support unit devices. Specify driver by hitting F6 as soon as the NT4.0 blue screen appear and before it began to analyze andcopy files from CD or 3 setup diskettes. The driver to specify, which is on diskette #2 is CPQARRAY.SYS.