XP PA host agent connectivity

[msaygak]

Hello!
We have new installation of XP24K and i want to add this system to Perfomance Adviser. I've installed host agent on HP-UX. I've presented command device from XP to that HP-UX. And now I must write a letter to our NOC and security team.
They want to know which ports should be open on xp pa host agent and xp pa management station.
I can not find such information in manuals. Please provide me.
Thanks.

[IBaltay]

Hi,
this guide should help you:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01754291/c01754291.pdf?jumpid=reg_R1002_USEN

[msaygak]

there are no network requirements in this document.
Also troubleshooting guide recomends ping host agent and check connectivity. But I should describe network ports requirements to our NOC before.

[ks6542 · Accepted solution]

As far I know you dont have to bother about your port settings,it will work on default http port 80..

[msaygak]

by default firewall is set to block any network communication. I should open several ports before start host agent.

[ks6542]

Is it working? I just check about the port settings and yes it just require http ports to communicate.. so you no need to bother about else ..cheers :P

[msaygak]

i wrote a letter to our noc with ask to open firewall between host agent and XP PA management station oprt 80. As soon as they permit network communication i will let you know :)

[msaygak]

noc permitted communication between host agent and management appliance port 80.
That's enough for perfomance adviser.

[msaygak]

host_agent ---> management_appliance:80