cancel
Showing results for 
Search instead for 
Did you mean: 

XP512 Array

Ashish_29
Occasional Contributor

XP512 Array

HP CE is adding 2 array groups in XP512. Is there any way from SVP to find out which are the new LDEVs and respective id's have been created from new added array groups?

2 REPLIES
Dave La Mar
Honored Contributor

Re: XP512 Array

Ashish -
This is a job for Command View. I would be surprised if you said you were administering only via the SVP. In any regard, the SVP should provide the ldev information, though I have not tried this.
Via command view, it would be available luns, thus look for availble luns on the SVP

Best of luck.

Regards,

dl
"I'm not dumb. I just have a command of thoroughly useless information."
Alzhy
Honored Contributor

Re: XP512 Array

You should be using Hitachi LUN Manager (or in HP's lingo --- "CommandView" (Yes XP's are Hitachi Data Systems arrays). If you're familiar with the tool - then you should be able to tell what CU (control unit) the CE assigned the LDEVs (chunks of array groups - which could be any of the OPEN* emulation or CSV).


Remember on XP arrays.. CU:LDEV is the key. LDEV's map to CUs. CU:LDEVs map to ports or hostgroups.

Hakuna Matata.