cancel
Showing results for 
Search instead for 
Did you mean: 

abot hsz70

leyearn
Regular Advisor

abot hsz70

I added six disks to the hsz70
>run config
>add raidset r5 disk10300 disk20300 disk30300 disk40300 disk50300 disk60300
>init r5
>create_partition r5 size=50
>create_partition r5 size=largest
>add unit d104 r5 partition=1
>add unit d105 r5 partition=2


11-AUG-1946 16:45:35 (time not set)-- Instance Code: 0328450A
Template: 81.(51)
Power On Time: 6. Years, 37. Days, 9. Hours, 10. Minutes, 56. Seconds
Controller Model: HSZ70
Serial Number: ZG92902720 Hardware Version: H03(49)
Firmware Version: V70Z(70)
Unit Number: 104.(0068)
Unit Software Version: 1.(01) Unit Hardware Version: 54.(36)
Retry Level: 1. Retries: 0.
Port: 2. Target: 3. LUN: 0.
SCSI Device Type: 0.(00)
Device ID: "RZ1CD-CS (C) DEC" Device Serial Number: "LG610516"
Device Firmware Revision Level: "0306"
SCSI Command Opcode: 40.(28)
Sense Data Qualifiers: 128.(80)
SCSI Sense Data:
Error Code: 112.(70) {current command execution}
Information field is valid
Segment: 0.(00)
Sense Key: 1.(01) RECOVERED ERROR
ILI: 0 EOM: 0 FM: 0
Information: C8C80A00
Additional Sense Length: 10.(0A)
Command-Specific Information: 00000000
ASC: 24.(18) ASCQ: 1.(01)
FRU: 234.(EA) Sense-Key Specific: 2D0080
Instance Code: 0328450A
hsz70_1>

what's the meaning of the message?


2 REPLIES
Vladimir Fabecic
Honored Contributor

Re: abot hsz70

See:
Sense Key: 1.(01) RECOVERED ERROR
That probably means that disk
Device ID: "RZ1CD-CS (C) DEC" Device Serial Number: "LG610516"
had some retry in writing data.
That can caused by bad block, some time-out and simular.
Nothing to worry about too much. But if this disk produce many messages like that, it should be replaced.
Regards
In vino veritas, in VMS cluster
Larry De Clay
Frequent Advisor

Re: abot hsz70

Hi,
Yes, the disk DISK20300 was who logged this error. It´s a recovered error and you have to monitor it if that happen frequently probably you have to replace the disk.

Bye,
Larry