Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

add enclosure

dex-mase
Advisor

add enclosure

I need to add 2 enclosure to my eva.
is my attachment correct

thank
luigi
5 REPLIES
Rob Leadbeater
Honored Contributor

Re: add enclosure

No idea. Not everyone has visio you know !

Cheers,
Rob
Uwe Zessin
Honored Contributor

Re: add enclosure

Looks fine although the HSV controllers take only one EAB port, because they are connected with an Y-cable.
.

Re: add enclosure

Hello Luigi,
For good configuration, it's recommended to add the new enclosures at bottom of controlers. So at the end, you need to have the controlers with EAB ID 5 and enclosures with ID 1 to 4.
Therefor, the loop cabling is good.
Loïc, from AntemetA, France
IBaltay
Honored Contributor

Re: add enclosure

Hi, your cable connection diagram is correct for both loops (loop A and loop B)
the pain is one part of the reality
IBaltay
Honored Contributor

Re: add enclosure

Hi,
additionaly, to be sure that you are correct also in the enclosure address bus connection i am sending you the picture
the pain is one part of the reality