add enclosure

[dex-mase]

I need to add 2 enclosure to my eva.
is my attachment correct

thank
luigi

[Rob Leadbeater]

No idea. Not everyone has visio you know !

Cheers,
Rob

[Uwe Zessin]

Looks fine although the HSV controllers take only one EAB port, because they are connected with an Y-cable.

[Loïc Bouquet (AA)]

Hello Luigi,
For good configuration, it's recommended to add the new enclosures at bottom of controlers. So at the end, you need to have the controlers with EAB ID 5 and enclosures with ID 1 to 4.
Therefor, the loop cabling is good.

[IBaltay]

Hi, your cable connection diagram is correct for both loops (loop A and loop B)

[IBaltay]

Hi,
additionaly, to be sure that you are correct also in the enclosure address bus connection i am sending you the picture