Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

adjust temperature warning for EVA

SOLVED
Go to solution
Athome
Advisor

adjust temperature warning for EVA

Hi!
is it possible to adjust the temperature warning-level for the eva? we would like to set it abit lower.

I see that in CV > System Options > Configure Event notification > 31142: SC Event Code: 090e3605 - The temperature trip point for a temperature sensor located within an HSV200 controller has been reached.
Is selected but underneath is another(not selected):

31143 SC Event Code: 090f2e05 - The temperature within an HSV200 controller is approaching its trip point.

What temps is those set to? and can I change them?
3 REPLIES
Mark...
Honored Contributor
Solution

Re: adjust temperature warning for EVA

Hi,
To the best of my knowledge you are NOT able to alter/modify/change any temp thresholds for anything on an EVA.
To view your settings for the ctrl then navigate down to "hardare" then "rack" the "controller encl x" then "controller a or b" then tab "enclosure". You will find the info there.
Mark...
if you have nothing useful to say, say nothing...
sreekanthtm
Trusted Contributor

Re: adjust temperature warning for EVA

Hi,

>>>is it possible to adjust the temperature warning-level for the eva? we would like to set it abit lower.

No, In EVA there is no option to change the temperature threshold value.
See the Threshold values and sensor location attached.

Rgds,
Sreekanth.
Athome
Advisor

Re: adjust temperature warning for EVA

ok, Thanks for reply