Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

after reinstall hpux ,AutoRaid12H command can't work normally

yuchengliu_1
Occasional Contributor

after reinstall hpux ,AutoRaid12H command can't work normally

reinstall a hpux os,then the AutoRaid12H
command can't work normal,please help

# arraydsp -i
Arrays known to the ARMServer:
No arrays were found by the ARMServer
# arraydsp -a 0000003780B7
arraydsp: The entered does not identify a known, supported array
#
4 REPLIES
Shameer.V.A
Respected Contributor

Re: after reinstall hpux ,AutoRaid12H command can't work normally

Hi ,

Please do the following command.

# amdiscover
or
#armdiscover
Which will enable your system to find the attached storage box.

Also check drivers are installed properly for your HBA, where your storage box is connected.

Also install HP Storageworks COmmand view SDM also.

Let us know the result of the above commands.

Regards,

Shameer
.... See invisible, feel intangible and achieve impossible as everything is possible ....
Yogeeraj_1
Honored Contributor

Re: after reinstall hpux ,AutoRaid12H command can't work normally

hi

also, ensure that the patch level is also OK.

kind regards
yogeeraj
No person was ever honoured for what he received. Honour has been the reward for what he gave (clavin coolidge)
Rainer von Bongartz
Honored Contributor

Re: after reinstall hpux ,AutoRaid12H command can't work normally



did you re-install the same version of hp-ux ??

The AutoRaid is not supported for
OS > HPUX 11i vers 1.5

Do you see the AutoRaid LUN's using onconfig ??

Regards
Rainer
He's a real UNIX Man, sitting in his UNIX LAN making all his UNIX plans for nobody ...
Rainer von Bongartz
Honored Contributor

Re: after reinstall hpux ,AutoRaid12H command can't work normally

sorry, I was in the middle of configuring an INFORMIX server.

Of course you should check the LUN'S with ioscan on NOT with onconfig

Regards
Rainer
He's a real UNIX Man, sitting in his UNIX LAN making all his UNIX plans for nobody ...