Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

armlog report

Delrish
Trusted Contributor

armlog report

Hi Everybody,

I have a VA7110 it has 15 HDDs. I received this output from “armlog –d M/D12 ”.It is about read errors on disk #12.I cannot understand it. What is ECC used? As you see ,among of “Total Corrected read errors” is two time bigger than “Total MegaBytes read”. On other disks “corrected read” and “ECC used” are much less than “Total Megabyte read”. What do you think. Is disk #12 damaged and I should change it? Does it effect the performance?
Please advice.

Alireza

Read Error Counter Page 0x03
Corrected read errors without delay =55,649,927
Corrected read errors with delay = 0
Corrected read errors with retry = 0
Total Corrected read errors = 55,649,927
Total times read ECC used = 55,649,927
Total MegaBytes read = 20,967,853
Total Unc
2 REPLIES
aliasgar
Valued Contributor

Re: armlog report



Hi Alireza,


can u attach the armlog file .


Thanks/regards,
Aliasgar.
aliasgar
Delrish
Trusted Contributor

Re: armlog report

Thank you Aliasgar,

I found out that I have this problem on disk 10 too. Find the attached file, armlog report.

Alireza