Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

check status of smartarray controller and disks

Markus Paesler
Occasional Contributor

check status of smartarray controller and disks

I want to check the state of disks and arrays at my smartarray (6402/6404) controller with a little commandline programm.

I need the programm for hp-ux 11.23 and W2K/W2K3.

Is there a API or SDK available?

Thanks for your help!
1 REPLY
Ron Lawson_1
Trusted Contributor

Re: check status of smartarray controller and disks

For HP-UX 11.23 (0904 or later) use /opt/raidsa/bin/saconfig devfile