Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

comanndview para un VA7100

Eduardo Esquivel
Occasional Contributor

comanndview para un VA7100

instale el Commandview para un va7100 en mi servidor que esta conectado por fibra hacia el va y no logra descubrirlo, alguioen tiene algun procedimiento a seguir.
5 REPLIES
Torsten.
Acclaimed Contributor

Re: comanndview para un VA7100

Hi,

please try to ask your question in english, please.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: comanndview para un VA7100

Hi,

please try to ask your question in english, please.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Eduardo Esquivel
Occasional Contributor

Re: comanndview para un VA7100

Hi

install in my server with windows 2003 server, the commandview smd for VA7100, and not discover the VA7100, help me¡¡¡
Andy_Stor
Valued Contributor

Re: comanndview para un VA7100

Hi,

Could you give some more information on how is the VA7100 connected with your host and what happens when you run the armdiscover command on the host?
Eduardo Esquivel
Occasional Contributor

Re: comanndview para un VA7100

HI

MY VA 7100 RUN ON SWICTH PROCURE FC, CONNECT FOR FIBRE CHANEL ON ONE SERVER WITH 2003 SERVER WITH TARGET THE FIBRE LC