Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

configuration MSA 1500cs with hpux 11i version2

HP_GUY
Occasional Contributor

configuration MSA 1500cs with hpux 11i version2

we have received two SAN switch 4/8 , MSA 1500 cs and server rx2660 running with hpux 11i V2.
when i try ioscan -fnC disk i can not see the disk for the MSA 1500cs
please any one help me

best regards
2 REPLIES
Srikanth.D
Occasional Advisor

Re: configuration MSA 1500cs with hpux 11i version2

We need to know how they are connected in the SAN and if any Multi-Pathing software is installed.
GIO_6
Occasional Advisor

Re: configuration MSA 1500cs with hpux 11i version2

Hi..
unfortunately, it is hard to tell with the info provided.

Was it working before or is this a new set-up?

Since this is a MSA1000 (disk array) you will never see the disks in ioscan but the LUNs created on it.

there are many variables that could prevent the host from seeing the MSA (zoning in the switches, cables, gbics, HBAs, not proper config from the MSA1500 CLI, etc,)

please provide output of ioscan -fn and "show tech_support" from the MSA1500 in order to have a better picture.

For more info about using the CLI please go to: http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01183955/c01183955.pdf


GIO.
"You´ve always been taking but now you're giving..."