connection between RX4610 and VA7100

[CSP_ALGERIA]

hi team
we've got an rx4610 based itanium with linux red_hat 7.2 and av7100 connected to it via fc cards . we have installed SDM but we can't see our va7100 when we use cvui or gui sdm for example.

when we do armdiscover we have this message:

remote discovery failed with status:
the dal daemon is not running .the database content may not be current.

NB:diald and hostagent are running

THANKS

[Eugeny Brychkov]

Check that you have set Linux host port behavior for this host (using host behavior table) or set default Linux behavior;
You should create LUN 0 on the VA to allow management software to see it => LUN 0, size 10MB, permissions 'WC' and no user data on it;
Check with system diags is you can see LUNs configured on VA - if yes, then it's VA management software problem, if no - then FC/VA problem;
Try restarting opendial and hostagent daemons and issuing armdiscover again;
Check if opendial daemon is really running, and if it fails, check error code
Eugeny

[CSP_ALGERIA]

hi eugeny

please what dou mean by set host linux host port behavior for this host(using host behavior table) or set default linux behavior ?
IF IT IS MEAN [ mgr -os linux
-c 1] [mgr -os linux -c 2]
i've done it,i've created also lun0 10M whitthout data and i've disabled security if
this is WC.
my daemons are running
with fdisk i can see all my luns i created ,i can create my file systems ,i mont muy lun. but i cant see my va with sdm(command or gui),my file access.dat in config of commandview in sanmgr is contents ipadresses of localhost and remote client

thanks

[Vincent Fleming]

Here's a link to the docs for installing on Linux:
http://www.hp.com/cposupport/manual_set/lpg29236.pdf

Did you follow the directions and install the patches for SDM???

It sounds like you did everything else correctly.

Good luck!

Vince