Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

connectivity of HP Autoraid 12H to DL380 windows server

Kamel Abada_2
Occasional Contributor

connectivity of HP Autoraid 12H to DL380 windows server

Hi,
We have an Autoraid sitting idle and we like to know the possibilty to use it.
We would like to connect it to a DL380 windows 2003 enterprise edition server.

What are the scsi cards that we need?

Many thanks

Best Regards

Kam
3 REPLIES
tkc
Esteemed Contributor

Re: connectivity of HP Autoraid 12H to DL380 windows server

The controller for AutoRAID 12H is using SCSI-2 wide differential interface. You may refer the manual here :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00269878/c00269878.pdf

AutoRAID Model 12H is supported on Windows NT 4.0 with Service Pack 3. Windows NT requires firmware revision HP26 or greater.
tkc
Esteemed Contributor

Re: connectivity of HP Autoraid 12H to DL380 windows server

tkc
Esteemed Contributor

Re: connectivity of HP Autoraid 12H to DL380 windows server