HPE Community
Disk Enclosures
1753487 Members
4524 Online
108794 Solutions
New Discussion

diferent configuration on the NVRAM and discs

 
Lionel Garcia
Occasional Contributor

‎11-20-2000 12:31 PM

‎11-20-2000 12:31 PM

diferent configuration on the NVRAM and discs

I have a netraid and it tells me that i have a diferent configuration on the cards NVRAM and the disks
0 Kudos
Reply
1 REPLY 1
Jamie Hughes
Honored Contributor

‎11-20-2000 12:50 PM

‎11-20-2000 12:50 PM

Re: diferent configuration on the NVRAM and discs

Hi Lionel,

To fix this nvram mismatch, press ctrl-m when the machine is posting up the netraid info. Go into the netraid config utility and go to Configuration - View/Add/Delete configuration. It will tell you that you have two different configs. View both of them and SAVE the one that is correct. After you do that and reboot, the mismatch should be gone. Make sure you pick the right config though or you will have to reconfigure the arrays.

Best regards,
Jamie Hughes
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.