cancel
Showing results for 
Search instead for 
Did you mean: 

dl360

Mark Pasechnick
Occasional Visitor

dl360

I have a dl360 g3 running w2k sp4 and lotus notes. The server is crashing once a day with the error pci bus error slot 0,bus 0,device 5, function 0. I found this device to be HP Porliant iLO advanced system Management controller. I have updated the drivers for the ilo management interface driver and iLO advanced system Management controller. The server still crashed again. Is there anything else i should look for or any other solutions available.
3 REPLIES
MT19
Valued Contributor

Re: dl360

Has this ever been resolved? I'm encountering it now.
Víctor Cespón
Honored Contributor

Re: dl360

The ILO is a chip integrated on the motherboard (hence error slot 0, bus 0). Try reload/update it's firmware, if it keeps giving errors, there's a problem on some circuit on the motherboard and it needs to be replaced.
MT19
Valued Contributor

Re: dl360

Ya, after running te Firmware Maintenance CD 8.2 and the firmware was update on the iLO, I recieved the below error in POST...

PCI Bus Parity Error PCI Slot 00

When I looked up the above error in the forus, I found the resolution was to replace the system board. I replaced the system board last night, and the server has not crashed since.

Thanks for the response. I went to give points but realised I couldn't since this is not my post.
MT