Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

error command view eva software

Deepak kumar_3
Frequent Advisor

error command view eva software

hi
I have

1. HP 16 por switch
2. EVA110 attached with six disk enclosure.
3.window box with command view eva software
installed.
all together i made a SAN.
when i am discovering storgage sub-system(i.e EVA110 ) through command view EVA it coming out with error "comunication lost".
I can see all light are green on back of HSV110.

Any boby faced this problem.any sugesation is welcome.

-Deepak
3 REPLIES
Bostjan Kosi
Trusted Contributor

Re: error command view eva software

Hi

Is your windows server set up as an multipourpose host or as a dedicated management station...If there is zonning, are they implemented correctly..do you have supported HBA installed...Has this EVA system been initialised before or is it a new one...How many green LED's on the controllers front do you have. One steady and one blinking...

Lots of questions to answer...

regards,
Nothing is impossible for those that don't have to do it themselves!
Deepak kumar_3
Frequent Advisor

Re: error command view eva software

Hi,

1.Dedicated management station.
2.No zoning.
3.If i conect some other EVA its able to
detect,that confirm HBA driver is healthy.
4.One steady green and other blinking.

-Deepak
Bostjan Kosi
Trusted Contributor

Re: error command view eva software

Since you say you can monitor other EVA systems from the same management station some additional ideas...

Check VCS version on eva system, upgrade to the latest Command View. You must have a minimum of 3.2 to be able to work with 3.020 VCS, higher is better....

If that doesn't help...beets me, I'd go to the SAN supported matrics and recheck all FW related issues...

BR
B.
Nothing is impossible for those that don't have to do it themselves!