Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

fcd driver not loading on rp4440 with HP Tachyon XL2

Cliff Siebert
Occasional Visitor

fcd driver not loading on rp4440 with HP Tachyon XL2

I really need some help. I have been everywhere google will take me :).

I can not get the fcp driver to load on my fiber card. I can only get the /dev/td1 to show up in ioscan. when I do fcmsutil /dev/td1, the output appears the same as on the post found here.

# fcmsutil /dev/td1

Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0x010500
N_Port Node World Wide Name = 0x50060b00002461af
N_Port Port World Wide Name = 0x50060b00002461ae
Driver state = ONLINE
Hardware Path is = 0/2/1/0
Number of Assisted IOs = 0
Number of Active Login Sessions = 0
Dino Present on Card = NO
Maximum Frame Size = 2048
Driver Version = @(#) td - HP Fibre Channel Tachyon TL/TS/XL2 Driver B.11.31.04 /ux/core/isu/TL/kern/src/common/td/td_drvinit.c: Jan 20 2008, 10:55:26

does anyone have any ideas? surely I'm not the first to have this issue?

thanks

Cliff
1 REPLY
Torsten.
Acclaimed Contributor

Re: fcd driver not loading on rp4440 with HP Tachyon XL2

Hi,

what exactly is the problem?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!