HPE Community
Disk Enclosures
1753868 Members
7143 Online
108809 Solutions
New Discussion

host mode for RH AS3.0 with A6826A hba

 
ecorban
Frequent Advisor

‎11-24-2004 06:31 AM

‎11-24-2004 06:31 AM

host mode for RH AS3.0 with A6826A hba


Hi
I have an rx2600 with RH AS3.0 and the A6826A hba with qlogic driver, 7.0.03 running on it.
Im connecting to an HDS 500r (tagmastor unit)
through a Brocade SAN but i cant get the following host modes to work forthe hba being used: 00, 03, 08.

is there any other way to gett his to work ?
0 Kudos
Reply
1 REPLY 1
Zygmunt Krawczyk
Honored Contributor

‎11-25-2004 12:26 AM

‎11-25-2004 12:26 AM

Re: host mode for RH AS3.0 with A6826A hba

Hi Eddie,

download and install the EFI driver for A6826A v1.37

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co-25050-1〈=English+%28US%29&prodTypeId=15351&prodSeriesId=88837&locale=en_US

Regards,
Zygmunt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.