how to boot from multiple logical drives?

[Mircea Giurgeu_1]

Hi all,

P410 controller in a DL370. I have multiple physical disks configured in multiple arrays:
- Array 1 with Logical Drive A
- Array 2 with Logical Drive B
- Array 3 with Logical Drive C

How do I configure the server to boot from a specific Logical drive (A or B or C)?

I can't find anything in ACU on in ROM Based Setup (F9) where I can specify which array I want to boot from.

tx,

[Víctor Cespón · Accepted solution]

Smart Array controllers boot from the first logical unit on the first array. That cannot be changed.

[Mircea Giurgeu_1]

From what I can see, you can't even change the order of the array's. There's got to be an explanation to this. I can't believe HP designed this on purpose.