HPE Community
Disk Enclosures
1752781 Members
6555 Online
108789 Solutions
New Discussion

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

 
Torsten.
Acclaimed Contributor

‎09-02-2009 03:05 AM

‎09-02-2009 03:05 AM

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Let's say your hp-ux host has fcd devices, e.g.
/dev/fcd0

get the port WWN
# fcmsutil /dev/fcd0

and present your vdisk to this WWN.

Caution: make sure to present in hp-ux mode!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Rob Leadbeater
Honored Contributor

‎09-02-2009 06:09 AM

‎09-02-2009 06:09 AM

Re: how to connect my controller HSV 200A to my bay (P/N AD542B)

Hi,

If the cache batteries have failed, then you will not see any Vdisks. They must be replaced.

Cheers,

Rob
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.