Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

how to monitor mds 600 disk array

Larry Harder_1
Occasional Contributor

how to monitor mds 600 disk array

We have  rack mounted c7000 G2 Bladecenters. Attached to the bladecenter are two MDS 600 external disk arrays.  We can monitor the bladecenter, blades  and disks inside the mds600  with a combination of insight management agents and SCOM 2012 R2 management packs. What it looks like to me is we can't monitor the mds 600 enclosure itself for over temp conditions, fan or power supply faults etc. I notice those errors do show up on a led display on the back but we have a number of mds 600's at offsite locations.

 

I looked through the mds600 documentation and they only mentioned hard drive errors using Insight management agents. Is there a way to monitor the mds600 itself?