Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

how to set my integrated controler as cotroleur 0 ???

Ayman Altounji
Valued Contributor

how to set my integrated controler as cotroleur 0 ???

I want to set my integrated controler as controler 0 to instal sysytem on it.
but i have a 5300 controler that must drive an external disk bay.
When i attend to install sysytem it installs on the 5300 not on teh integrated controler.
how can i solve this please ???
1 REPLY
Mark Cloutier
Respected Contributor

Re: how to set my integrated controler as cotroleur 0 ???

If this controller is on a proliant server, what you need to do is set the controller order in the BIOS (ROM). On most Compaq servers, you have to select F10 when prompted at boot. Then select System configuration, configure hardware, review and modify hardware settings, view and edit details and then you scroll down to the Compaq 5300 array controller and there will be a line that shows you the controller order. Press enter at that line to select the controller order and F10 when done to save changes and exit.If you have a non-Compaq server, you may need to verify this with your server manufacturer. If you have problems doing this or any other questions, feel free to call 1-800-ok-compaq.
We are here for a good time, not a long time!